OBi110 PSTN Caller ID Problem - 应leftright呼吁（45#），HK PSTN的Caller ID是否有Name + Number呢？
[i=s] 本帖最後由 角色 於 2011-3-23 05:59 編輯 [/i]OBi110接香港PCCW固话后，用自己的手机拨打自己的PSTN电话，不能检测自己的来电显示。
根据member的信息，手机打入PSTN，FXS电话能接。而雯雯的setting也能工作，但是来显的号码不能显示出来。
角色 OBIHAI know the problem now.
[url]http://www.obitalk.com/forum/index.php?topic=374.0[/url]
I am contacting obihai support and they will upgrade my unit with testing firmware to include a new detection method to match Hong Kong's Caller ID system.
I will post the result here.
Hope they can fix the problem. Thanks you for your work. Hope OBiHai technical is able to find out the solution for detecting HK CallerID.:handshake
YH [b]回復 [url=http://www.telecom-cafe.com/forum/redirect.php?goto=findpost&pid=13130&ptid=3452]2#[/url] [i]mwpmo[/i] [/b]
I enounter the same problem as you. The callerid on my phone set shows incorrect number with the last digit missing and an extra number is added in the front.
Await your good news and thanks for sharing. As for my case, I see nothing. What is the settings such that incorrect digits are able to be shown?
YH Phyical Interface --> Line Port --> Port Setting --> CallerIDDetectMethod
Default setting "FSK(Bell202)"
I got "5" add at the beginning and the last digit was missing.
Phone : 12345678
CallerID shown : 51234567
After I changed the setting
from "FSK(Bell202)" to "FSK(V2.3)"
The "5" digit at the beginning change to "0"
CallerID shown : 01234567 [b]回復 [url=http://www.telecom-cafe.com/forum/redirect.php?goto=findpost&pid=13136&ptid=3452]6#[/url] [i]mwpmo[/i] [/b]
Thank you for your information.
YH Following your guide, I've tried several times with the result as below:
1st time, CallerID shown: 31234567
2nd time, CallerID shown: 91234567
3rd time, CallerID shown: 01234567
4th time, CallerID shown: 21234567
I used the same Mobile phone with the same number to call-in, it seems OBi110 generated a random number and add it in the front of the caller number. Please capture the figure to show where you find the above information.
Thank you.
YH Just click [b]Call History [/b]under [b]Status [/b]in the Directory Menu on the left hand side. There you go. Two more trials but no CallerID is shown this time. Nothing is diaplayed on the phone set. You can find the detected CallerID in the Call History in WEB interface
Status --> Call History
For my case, I always got "5" with FSK(Bell202) and "0" with FSK(v2.3) [i=s] 本帖最後由 bubblestar 於 2011-3-18 12:25 編輯 [/i]
My recent 6 trials' result.
[attach]555[/attach] [i=s] 本帖最後由 bubblestar 於 2011-3-18 12:28 編輯 [/i]
The first 4 trials indicated that a random digit was generated in the front of the call-in number. [b]回復 [url=http://www.telecom-cafe.com/forum/redirect.php?goto=findpost&pid=13136&ptid=3452]6#[/url] [i]mwpmo[/i] [/b]
May I know the way that you use VoIP phones and the ATAs or servers that you have?
YH [b]回復 [url=http://www.telecom-cafe.com/forum/redirect.php?goto=findpost&pid=13147&ptid=3452]13#[/url] [i]bubblestar[/i] [/b]
Thanks bubblestar.
YH I just install OBi110 in HK with phone and phone line connected.
I wish to use OBiON install in my iPhone to call home or other HK number through OBi110.
And forward all incoming calls to my iPhone when I am not in HK.
Just like the case of Mary in OBAHAI site. [b]回復 [url=http://www.telecom-cafe.com/forum/redirect.php?goto=findpost&pid=13136&ptid=3452]6#[/url] [i]mwpmo[/i] [/b]
反覆測試過很多次了，無論是否把 FSK(Bell202) 轉為 FSK(V2.3)，結果都是一樣，來電號碼都會被加入一個Random digit。
另外，我對比SPA3102 的設定，根本預設的Bellcore 已經完全可以顯示正確CallerID 了。我再對比一下IP01 IP-PBX，也是用預設的Bell for USA 亦能正確顯示，反而無需改成V.23。 V23 係For UK 及 Japan。
希望OBiHAI 能盡快解決問題吧。 [i=s] 本帖最後由 mwpmo 於 2011-3-19 09:59 編輯 [/i]
OBIHAI support team uploaded a testing firmware to my unit "Software 1.20 (Build 2085)"
(All they need is just the OBi Number of my unit and my OBiTalk account name, then they can push the new software to my unit)
Result :
The OBi110 can now [b]detect correct CallerID[/b] from the line but [b]fail to show it on the phone[/b].
------------------------
My Test Setup
Test phone number – 12345678
Setting in each case in just about the port section in both Line Port & Phone Port only.
Result :
Case 1) Firmware version 1.1.0 (Build 1892)
Setting : All defaults except “CallerIDTrigger” is “After Polarity Reversal”
CalledID shown in Call History web page : 51234567
CalledID shown in my phone unit : 51234567
Case 2) Firmware version 1.1.0 (Build 1892) (FSK(V2.3))
Setting : All defaults except “CallerIDMethod” is “FSK(V2.3)” & “CallerIDTrigger” is “After Polarity Reversal”
CalledID shown in Call History web page : 01234567
CalledID shown in my phone unit : 01234567
Case 3) Firmware version 1.2.0 (Build 2085)
Setting : All defaults except “CallerIDTrigger” is “After Polarity Reversal”
CalledID shown in Call History web page : 12345678
CalledID shown in my phone unit : blank
Case 4) Firmware version 1.2.0 (Build 2085) (FSK(V2.3))
Setting : All defaults except “CallerIDMethod” is “FSK(V2.3)” & “CallerIDTrigger” is “After Polarity Reversal”
CalledID shown in Call History web page : 12345678
CalledID shown in my phone unit : blank
Case 5) Firmware version 1.2.0 (Build 2085)
Setting : All defaults
CalledID shown in Call History web page : blank
CalledID shown in my phone unit : blank
Case 6) Firmware version 1.2.0 (Build 2085) (FSK(V2.3))
Setting : All defaults except “CallerIDMethod” is “FSK(V2.3)”
CalledID shown in Call History web page : blank
CalledID shown in my phone unit : blank Awaiting further testing. They may further adjust the setting in the firmware. [b]回復 [url=http://www.telecom-cafe.com/forum/redirect.php?goto=findpost&pid=13178&ptid=3452]19#[/url] [i]mwpmo[/i] [/b]
Thank you for your reports on the new firmware provided to you by Obihai Technology. I hope OBi technical support is able to sort out this problem very soon.
YH 这个问题目前都是香港固话才遇到的吗？不知道大陆的是否也这样，虽然制式都差不多，好像雯雯都没有提到过，莫非没问题呢？
突然发现Call History这个功能正是我强烈期望SPA4000能拥有的，我很需要，知己知彼，不用在搞一个东西额外做记录了 [b]回復 [url=http://www.telecom-cafe.com/forum/redirect.php?goto=findpost&pid=13191&ptid=3452]22#[/url] [i]仁杰[/i] [/b]
因為我大陸的固話沒有申請來電顯示功能! [b]回復 [url=http://www.telecom-cafe.com/forum/redirect.php?goto=findpost&pid=13196&ptid=3452]23#[/url] [i]雯雯[/i] [/b]
现在的固话不是免费的吗？
角色 [b]回復 [url=http://www.telecom-cafe.com/forum/redirect.php?goto=findpost&pid=13202&ptid=3452]24#[/url] [i]角色[/i] [/b]
是, 不過我這條寬帶+PSTN是公司申請的 (員工福利), 當時申請的時候如果要有來電顯示功能要另外加錢! 說起Call History，不知OBi110 能保留多少個記錄呢? 現在暫時我可以看到 71 個。嘩!自己睇返都覺得好誇張，好在是試打電話的記錄，如果真正要講電話，每個10分鐘計，71 x 10 = 710 / 60 = 11.833 小時了，真要命 !!:L [b]回復 [url=http://www.telecom-cafe.com/forum/redirect.php?goto=findpost&pid=13205&ptid=3452]25#[/url] [i]雯雯[/i] [/b]
我的固话是通过申请固网送的，不用申请来电显示也带的。
角色 Latest News.
With the testing firmware, OBIHAI fixed the CallerID detection problem in Hong Kong.
My phone unit can display correct CallerID now.
Hope they will release it to public soon. Congratulations! Very good news!!!:handshake
角色
頁:
[1]
2