Asterisk Opus Codecs
因為GSWave 有無多免費好用嘅功能， 所以加咗啲嘢係Asterisk Server 到， 可以比大家參考下Opus 係免費， 個流量大約60K 以下， 和G729 差不多！！
This document shows you how to install and use Opus codec in Asterisk server:
我係用Asterisk 13.13.1
1. Go to link, [url]http://downloads.digium.com/pub/telephony/codec_opus/[/url]
Here select appropriate Asterisk version of your instalation and then server architecture, in my case it was Asterisk 13 with 64 bit
2. Now download file as below,
- cd /usr/src
- wget [url]http://downloads.digium.com/pub/telephony/codec_opus/asterisk-13.0/x86-64/codec_opus-13.0_current-x86_64.tar.gz[/url]
3. Extract the downloaded file,
- tar -xvzf codec_opus-13.0_current-x86_64.tar.gz
- cd codec_opus-13.0_1.1.0-x86_64
4. Copy the codec_opus.so file into the Asterisk module directory
- cp codec_opus.so /usr/lib/asterisk/modules/
5. Copy the codec_opus_config-en_US.xml file into the Asterisk external documentation directory
- cp codec_opus_config-en_US.xml /var/lib/asterisk/documentation/thirdparty
6. Goto Asterisk CLI and restart it
- asterisk -rvvvv
- core restart now
- asterisk -rvvvv
- core reload
7. Now check opus codec running or not with below command
ubuntu*CLI> module show like opus
Module Description Use Count Status Support Level
codec_opus.so OPUS Coder/Decoder 0 Running extended
res_format_attr_opus.so Opus Format Attribute Module 1 Running core
If module not loaded, then try to load it manually from Asterisk cli,
- module load codec_opus.so
- module load res_format_attr_opus.so
8. Open file, nano /etc/asterisk/sip.conf and allow opus codec in it as shown below, so SIP soft phones can use that codec.
[general]
callcounter=yes ; enable device states for SIP devices
rtcachefriends=yes
udpbindaddr=0.0.0.0:5060
disallow=all
allow=opus
allow=ulaw
allow=alaw
allow=gsm
After adding, do sip reload from Asterisk cli to take changes into effect
ankit-desktop*CLI> sip reload
Reloading SIP
== Parsing '/etc/asterisk/sip.conf': Found
== Parsing '/etc/asterisk/users.conf': Found
== Using SIP CoS mark 4
== Parsing '/etc/asterisk/sip_notify.conf': Found
ankit-desktop*CLI>
頁:
[1]