電訊茶室's Archiver

角色 發表於 2019-2-11 23:25

Rapsberry Pi —— 有些鸡USB cables不能power up你的树莓派!!!

[i=s] 本帖最後由 角色 於 2019-2-12 00:05 編輯 [/i]

我们买USB cables连接USB adapter to Raspberry Pi 3b+要主要,不能看外表,外边看粗,可能voltage drop很大。

请大家先看看下面的video:

[url]https://www.youtube.com/watch?v=kKdUFcM87U8&t=326s[/url]

看完后,怎样办?一般买家根本不知道怎样选择!你可以用官方的Adapter 5.1V 2.5A(有UK头)连线micro USB plug,那么香港都可以用。但是香港有很多USB adaptors,但是USB cables就要小心了!!!

如果要安装,买能承受大current 2A,0.25m long,大家我可以考虑绿联(大陆牌子)我用过很多条,从来没有让我失望。我用两面上都可以power up我的Raspberry Pi 3b+。

角色 發表於 2019-2-11 23:38

[i=s] 本帖最後由 角色 於 2019-2-11 23:58 編輯 [/i]

绿联的 [url]https://detail.tmall.com/item.htm?id=16184646887&spm=a1z09.2.0.0.4b9c2e8dkHNqnM&_u=b2opncn9e7a[/url]

2A cables (0.25-1.0m cables)
1.7A  cables (1.5-3.0m cables)

根据信息: Power wires 用 AWG 22, Signal wires 用 AWG 28

如果电压到Raspberry Pi (all model)到 4.63±0.07V,系统就会显示电压过低。

根据上面信息,如果电压跌倒4.7V,有可能会显示低电压。

角色 發表於 2019-2-12 01:42

[i=s] 本帖最後由 角色 於 2019-2-12 01:43 編輯 [/i]

The following way to detect how good of the supply voltage

[url]https://raspberrypi.stackexchange.com/questions/60593/how-raspbian-detects-under-voltage[/url][code]
/opt/vc/bin/vcgencmd get_throttled
[/code]If the answer is:[code]
throttled=0x0
[/code].
You're good with the supplied voltage and SoC temperature.

角色 發表於 2019-2-12 20:14

[i=s] 本帖最後由 角色 於 2019-2-12 20:16 編輯 [/i]

公牛的micro USB线可以2.4A,值得考虑,不过价格就贵很多。[url=https://detail.tmall.com/item.htm?spm=a220o.1000855.1998025129.1.45b187e6gYO3PY&pvid=bf4ffae2-5a1c-4fd3-bbda-908c102b37b8&pos=1&acm=03054.1003.1.2768562&id=564467680303&scm=1007.16862.95220.23864_0&utparam={%22x_hestia_source%22:%2223864%22,%22x_object_type%22:%22item%22,%22x_mt%22:0,%22x_src%22:%2223864%22,%22x_pos%22:1,%22x_pvid%22:%22bf4ffae2-5a1c-4fd3-bbda-908c102b37b8%22,%22x_object_id%22:564467680303}&skuId=3568065364205]Link[/url]

頁: [1]

Powered by Discuz! Archiver 7.2  © 2001-2009 Comsenz Inc.