電訊茶室's Archiver

角色 發表於 2019-3-16 01:01

Successful login OpenConnect server over V2Ray's dokodemo

[i=s] 本帖最後由 角色 於 2019-3-17 20:04 編輯 [/i]

有的时候不知道为什么OpenConnect直接连香港的OpenConnect server不成功,于是我想起通过V2Ray's dokodemo的方式连接,结果成功,还有非常稳定。我的V2Ray连到大陆和香港以外的server,让后通过它再连香港的OpenConnect server。

我用的dokodemo的code:[code]
    {
      "protocol": "dokodemo-door",
      "port": 443,
      "listen": "192.168.55.22",
      "settings": {
        "address": "Openconnect-server IP or hostname",
        "port": 443,
        "network": "tcp",
        "timeout": 0,
        "followredirect": false
      }
    },
[/code].

角色 發表於 2019-3-16 01:31

When I ran the SSTP over V2Ray's dokodemo, it turned out unsuccessfully due to frequent  connections and disconnections. I think it may due to the poor network robustness of SSTP protocol. The next attempt I shall carry out OpenVPN over V2Ray's dokodemo. I hope that there may be no network issue using OpenVPN if the network robustness is as good as the OpenConnect protocol.

頁: [1]

Powered by Discuz! Archiver 7.2  © 2001-2009 Comsenz Inc.