Unsuccessful permanent login SSTP server over V2Ray's dokodemo
[i=s] 本帖最後由 角色 於 2019-4-9 10:43 編輯 [/i]With the two successes using V2Ray's dokodemo [1,2], I also attempted to use SSTP to see whether it works or not. The results turned out the connection could be established but disconnected very soon. Then it would re-connect again and then disconnect. As we used the same dokodemo method[1,2], it indicates that the SSTP protocol is not suitable for frequent packet drops.
In order to establish site-to-site connection, OpenVPN protocol is highly recommended. Also AnyConnect could be used but it requires additional configuration in order to achieve site-to-site connection. Since OpenVPN has been built in MikroTik routers, with the V2Ray's dekodemo (port forwarding), site-to-site connection could be easily stablished.
References:
[1] [url]http://www.telecom-cafe.com/forum/viewthread.php?tid=7390&extra=page%3D1[/url]
[2] [url]http://www.telecom-cafe.com/forum/viewthread.php?tid=7390&extra=page%3D1[/url] [i=s] 本帖最後由 角色 於 2019-4-9 11:33 編輯 [/i]
最近再次测试一下，结果SSTP连接方法都是不稳定，而用同样的方式用OpenVPN就没有问题，连接非常稳定。
如果你想site-to-site连接的话，可以考虑用OpenVPN把两边site连起来，然后再做下一层的工作，例如remote server access and VoIP等等。
頁:
[1]