返回列表 發帖
回復 11# 角色

可以, 以下引用manual的例子:

InboundCallRoute Examples:
1) ph OR {ph} OR {:ph} OR {@|?>@:ph} (all equivalent)
It says: Ring the PHONE Port for all incoming calls. This is the default InboundCallRoute for all trunks.

2) {14081223330|15103313456:ph,aa},{1800xx.|1888xx.|?:},{ph}
It says: Ring both PHONE Port and AA for calls coming from 1 408 122 3330 or 1 510 331 3456, block all 800, 888, and anonymous calls, and ring the PHONE Port for all other calls

3) {(x.4081113333|x.4152224444):aa},{ph}
It says: Ring the AA for calls coming from any number that ends with 408 111 3333 or 415 222 4444, and ring the PHONE Port for all other calls. Be sure to include the enclosing parentheses in this example since “x.” is a digit map specific syntax.

4) {200123456:aa},{sp1(14083335678)}
It says: Ring the AA for calls coming from 200123456. For all any other call, bridge it by calling 1 408 333 5678 using SP1 Service
Welcome to my TaoBao shop: http://mandymak520.taobao.com/

TOP

谢谢雯雯的信息。

角色

TOP

太強了. 那要加多一隻了~~~~

謝謝咁多位既努力

TOP

太強了. 那要加多一隻了~~~~

謝謝咁多位既努力
楊威利@HGC 發表於 2011-3-18 14:57


那么你要在【第二次团购】里说。

角色

TOP

好的, 謝謝

TOP

我看到叁与讨论愈来愈多!

In OBiHai forum, 电讯茶室 has been referred.

TOP

經過雯雯上面的提示,現在基本上已可以掌握到如何運用一些DigitMap 的原理了,OBi110 打出打入PSTN,VoIP-to-PSTN、PSTN-to-VoIP,AA,及接入自己的IPX 或 一般獨立使用已沒有多大問題,而且完全不需依靠OBiTALK Portal Wizard 的協助,全部人手設定。

下一步想了解如何使用 IP Dialing、Gateway 及 HTTP Digest 的一次撥號方式。

不過好似找不到類似 Enable IP Dialing 的地方,不知有邊位知道呢?

TOP

本帖最後由 ttmuskie 於 2011-3-19 14:19 編輯

My Chinese typing is deadly slow. So, I try to use English and hope you all don't mind.

This is a very good subject. And we can consolidate all different scenario together and try to get the solution.

I also have a little suggestion. If possible, use diagram with explanation will be wonderful. Since diagram is much more easy for people to understand and  digest.  Cheers!

TOP

Now problem! When I have time, I shall use some interesting diagram to illustrate different scenario.

YH

TOP

虽然至少下周末才能拿到OBi110,但在看完本帖后突然非常迫切的想知道CallRoute、DigitMap有没有考虑到回拨的特性,具体详细的需求,我已经开新贴说明了

http://www.telecom-cafe.com/foru ... &extra=page%3D1

TOP

If I just want to make call from HK to China (Using mobile phone or computer),  what is the best, easy and cheapest option?

On the other post, YF mentioned about et263 is 0.07/min. But, he also mentioned 0.12/min. Is it I missing something?

Thanks!

TOP

返回列表