返回列表 發帖

ATCOM IP01 Starter Guide?

I've an ATCOM IP01, I've updated it with the latest stock firmware '1.0.0.430.110318_release'.

Do you guys have a Starter Guide?

How to set up the IP01?  I've connected a PSTN to the FXO port, then, how to create users, how to set dial plan, how to set audio attendant?  How to set voice mail?  How to attach other SIP accounts?  How to make an analog phone attached to a Linksys 3102 as an extension of IP01?  And how about to attach an Obi110 as an extension?

Stephen WONG

Welcome to my TaoBao shop: http://mandymak520.taobao.com/

TOP

回復 1# stephenwong

How comes, you have the IP-01 for a long time, at least one year, right? Since you did not any response after the collection of IP-01, I though you did not have any problem in configuring the unit.

YH

TOP

回復 3# 角色

Dear 角色,

Ha, ha, I bought the IP01 from you!  And now, I've an SPA3102, an Obi110, an IP01, 2 IP-PSTN lines from New World Telecom.

I want to make them work, so that I can call from my iPhone using Fring from somewhere in the world, using the PSTN lines from my home.

I'm quite busy everyday, so, there are quite a lot of 'toys' at home to gather dust!

My thinking:

IP-PSTN line #1  --------> FXO IP01 -------> Internet Router ---------> ISP
IP-PSTN line #2 ---------> FXO Obi110 ---------/        |
Analog Phone -----------> FXS Obi110                      |
Analog Phone -----------> FXS SPA3102 --------------+

Stephen WONG

TOP

You need the IP01 to act as the middleman to handle all the PSTN calls

In your diagram, you do waste the FXO port of SPA3102

TOP

TOP

返回列表