我依家都穩吾到合適咯1u case,板都物色中,偏向intel or 台彎板,大陸板就埋搞
依家ATOM仲比較貴,可能會考慮下Intel Celeron Mobile processor~about 30w
1u case主要係放落櫃到,穩5到就買呢部直接放系廳到~又好睇
HK $180連Flex ATX雞牛,可以自己換 作者: 角色 時間: 2010-8-16 18:14
看来Tsintsin要求越来越高。买的东西都是工业用,而不是家用的。
角色作者: Qnewbie 時間: 2010-8-17 04:16
I bought my Atom machine, ITX-M4S2GAP, by accident(my relative clicked the photo next to the one I wanted).
At the very first test, it consumes 26~30W due to a usual 300W PSU, one DVD player, and an old 10G HDD. Each one contributes a few Watts. With a 4G CF card and 12V DC PSU, the power consumption stays steadily at 16W. The only problem is SLOW since I try to put ClearOS and asterisk into it. The bottleneck might be the I/O speed of CF card.
With 2.5" HDD(3~4W), the power consumption is below 20W.作者: TsinTsin 時間: 2010-8-17 09:39
回復 17#Qnewbie
maybe mlc, try slc CF and support UDMA mode
It is AMD-based platform with dual-lan & HD acceleration graphic card. The power consumption is 50W~60W in some reports.
For the mITX board I bought, the web link is http://www.micputer.com/.作者: ckleea 時間: 2010-8-17 17:33
回復 角色
To be honest, I DO forget the model I wanted .
It is AMD-based platform with du ...
Qnewbie 發表於 2010-8-17 16:22
Many of the ITX have one RAM slot with max 2 GB. Not enough.作者: 角色 時間: 2010-8-17 17:35
For running orindary Linux, I believe 1G RAM is good enough unless you have additiional programmes to run.
YH作者: ckleea 時間: 2010-8-17 17:45
I believe you may probably get a better equipped CPU. You may need to install skype connection as well. Each channel takes 40 - 60 MB. You may not need a true xwindow. But if possible, I still recommend to have more memory.作者: 角色 時間: 2010-8-17 17:54
Thank you for your suggestion. I shall consider it when I decide the hardware configuration of my next Asterisk server installed in Hong Kong.