Board logo

標題: ATCOM IP01 Starter Guide? [打印本頁]

作者: stephenwong    時間: 2011-9-23 10:09     標題: ATCOM IP01 Starter Guide?

I've an ATCOM IP01, I've updated it with the latest stock firmware '1.0.0.430.110318_release'.

Do you guys have a Starter Guide?

How to set up the IP01?  I've connected a PSTN to the FXO port, then, how to create users, how to set dial plan, how to set audio attendant?  How to set voice mail?  How to attach other SIP accounts?  How to make an analog phone attached to a Linksys 3102 as an extension of IP01?  And how about to attach an Obi110 as an extension?

Stephen WONG
作者: 雯雯    時間: 2011-9-23 11:00

回復 1# stephenwong

https://skydrive.live.com/?cid=1 ... 36811D7C2B60DA1!145
作者: 角色    時間: 2011-9-23 13:51

回復 1# stephenwong

How comes, you have the IP-01 for a long time, at least one year, right? Since you did not any response after the collection of IP-01, I though you did not have any problem in configuring the unit.

YH
作者: stephenwong    時間: 2011-9-23 15:09

回復 3# 角色

Dear 角色,

Ha, ha, I bought the IP01 from you!  And now, I've an SPA3102, an Obi110, an IP01, 2 IP-PSTN lines from New World Telecom.

I want to make them work, so that I can call from my iPhone using Fring from somewhere in the world, using the PSTN lines from my home.

I'm quite busy everyday, so, there are quite a lot of 'toys' at home to gather dust!

My thinking:

IP-PSTN line #1  --------> FXO IP01 -------> Internet Router ---------> ISP
IP-PSTN line #2 ---------> FXO Obi110 ---------/        |
Analog Phone -----------> FXS Obi110                      |
Analog Phone -----------> FXS SPA3102 --------------+

Stephen WONG
作者: ckleea    時間: 2011-9-23 21:51

You need the IP01 to act as the middleman to handle all the PSTN calls

In your diagram, you do waste the FXO port of SPA3102
作者: 角色    時間: 2011-9-24 12:41

SPA3102 Installation guide : http://www.telecom-cafe.com/foru ... &extra=page%3D1

ATCOM IP-01 Installation guide: http://www.hkepc.com/forum/viewthread.php?tid=1432347

YH




歡迎光臨 電訊茶室 (http://www.telecom-cafe.com/forum/) Powered by Discuz! 7.2