Cisco —— Cisco Certified Network Associate (CCNA®)
本帖最後由 角色 於 2014-9-14 13:26 編輯
Referece: http://www.systematic.com.hk/ccna.htm
1. OSI Reference Model
1.1 Background
1.2 OSI Layers
1.3 Layers Interaction (交互作用)
1.4 Benefits (好處) Provided by OSI Reference Model
2. Ethernet (以太網)
2.1 Logical Bus Design
2.2 Logical Switching (交換) Design
2.3 Common Forms of UTP (Unshielded Twisted Pair，非屏蔽雙絞線) Cable
2.4 Rollover (翻轉) Console (控制臺) Cable
2.5 Half-duplex (半雙工) Ethernet and Full-duplex (全雙工) Ethernet
2.6 Cisco Switch LED (燈)
3. Detail Concepts on Logical Switching
3.1 Ethernet Addressing
3.2 Switching Mechanism (機制)
3.3 More about Address Table
3.4 Exercises about Address Table
3.5 LAN (Local Area Network) Segmentation (分段)
4. Features Provided By Cisco Switches
4.1 Spanning Tree Protocol (STP, which is standardized as IEEE 802.1d)
4.2 Switch Management
4.3 Configuration Files and File Systems
4.4 Virtual (虛擬) Local Area Network (VLAN)
4.5 VTP (VLAN Trunking Protocol)
4.6 InterVLAN Routing
4.7 Static Entries in MAC Address Table
4.8 Port Security
5. IP Addressing
5.1 Structure (結構) of IP Address
5.2 Concept of Binary Number
5.3 Identifying (辨認) the Network ID in an Environment (環境) without Subnetting (子網路化)
5.4 Use of Subnet Mask (子網路遮罩)
5.5 Possible Values in an Octet of a Subnet Mask
5.6 Subnetting (子網路化)
5.7 Questions of IP Addressing
5.8 VLSM (Variable Length (不定長度) Subnet Mask)
6. TCP/IP
6.1 Transmission Control Protocol (TCP)
6.2 User Datagram Protocol (UDP)
6.3 Internet Protocol (IP)
6.4 Address Resolution Protocol (ARP)
6.5 Internet Control Message Protocol (ICMP)
7. Overview (概論) of Cisco Routers
7.1 Memory
7.2 Interfaces
7.3 DCE (Data Communication Equipment) and DTE (Data Terminal Equipment)
8. Basic Router Management
8.1 Features in Command Line Interface
8.2 Configuring Basic Settings of a Router
8.3 Obtaining Hardware Configuration and Software Version of the Router
8.4 Backing Up the Startup-configuration/Running-configuration
8.5 Backing Up the Flash Memory IOS
8.6 Upgrading Flash Memory IOS
9. Static Routing (靜態路由)
9.1 Route Entries for Directly Connected Networks
9.2 Static Routing Entries
9.3 Static Default Routing
10. Dynamic Routing (動態路由)
10.1 Introduction
10.2 Mechanism (機制) of Distance Vector Routing Protocols
10.3 Routing Information Protocol (RIP)
10.4 Enhanced Interior Gateway Routing Protocol (EIGRP)
10.5 Open Shortest Path First (OSPF)
11. Access Lists (存取清單)
11.1 Filtering Logic (過濾邏輯)
11.2 Access List Settings
11.3 Access List Types
11.4 Access List for Inbound / Outbound Data
11.5 Creating an IP Standard Access List and Applying it to an Interface
11.6 Adding a New Statement to an Access List
11.7 Removing the Application of an IP Standard Access List from an Interface
11.8 Creating an IP Extended Access List and Applying it to an Interface
11.9 One More Example on Filtering Data Traffic
12. Wide Area Networking (WAN)
12.1 Introduction to WAN
12.2 Point-to-Point Synchronous Protocols
12.3 Frame Relay (訊框傳送、幀中繼)
13. Cisco Discovery Protocol (CDP)
14. Network Address Translation (NAT)
14.1 背景
14.2 Main Advantage of Using NAT
14.3 Dynamic NAT
14.4 Dynamic NAT with Overload (負荷)
14.5 Configuration of IP Routing
14.6 Configuration of Dynamic NAT
14.7 Configuration of Dynamic NAT with Overload
14.8 Configuration of Static NAT
14.9 Configuration of DHCP
14.10 DHCP Conflict (抵觸)
15. IP Version 6
15.1 Overview
15.2 IPv6 Addressing Representation
15.3 IPv6 Basic Configuration
15.4 IPv6 Static Route
15.5 More About IPv6 Addressing
15.6 Configuration of OSPFv3
15.7 IPv6 Anycast
15.8 IPv4 to IPv6 Transition (演變) Strategies (策略)
16. SSH (Secure SHell) Access
17. EtherChannel
18. SNMP (Simple Network Management Protocol)
18.1 SNMP Overview
18.2 SNMP Versions
18.3 SNMP Sample Configurations
19. SYSLOG (System Message Logging系統訊息記錄)
19.1 SYSLOG to Console
19.2 SYSLOG to a Server
20. NetFlow
20.1 Traditional (傳統的) NetFlow
20.2 Flexible (靈活的) NetFlow
21. GLBP (Gateway Load Balancing Protocol)
Supplement:
IEEE 802.3ab
Internet、WAN Links及VPN的關係與分別
Password Recovery |
發表於 2014-9-14 13:11
| 