Rank: 1

1^# 跳轉到 » 倒序看帖

字體大小: tT

發表於 2010-10-30 07:11 | 只看該作者

Compiling Asterisk 1.8 on Centos 5.5 32/64 bits

本帖最後由 ckleea 於 2010-10-30 16:46 編輯

Just come across
http://astrecipes.net/index.php?n=398

Compile Asterisk 1.8 with iCal, GTalk, SNMP, MySQL, cURL and DAHD

This site describes how to compile in 64 bits linux.

I have modified to 32 bits. Gtalk can now work.
I

yum install gcc-c++ make gnutls-devel kernel-devel
yum install libxml2-devel ncurses-devel subversion doxygen texinfo
yum install curl-devel net-snmp-devel neon-devel
cd /usr/src
wget http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/dahdi-linux-complete-2.4.0+2.4.0.tar.gz
tar zxvf dahdi-linux-complete-2.4.0+2.4.0.tar.gz
cd dahdi-linux-complete-2.4.0+2.4.0
make
make install
[color=Red]make config[/color] ; missing from site.
cd ..
http://downloads.asterisk.org/pub/telephony/libpri/libpri-1.4.12-beta2.tar.gz
tar zxvf libpri-1.4.12-beta2.tar.gz
cd libpri-1.4.12-beta2
make
make install
cd ..
rpm -Uvh http://dl.atrpms.net/all/libiksemel3-1.4-2_2.el5.i386.rpm
wget http://sourceforge.net/projects/freeassociation/files/libical/libical-0.44/libical-0.44.tar.gz/download
tar zxvf libical-0.44.tar.gz
cd libical-0.44
./configure --enable-shared
make
make install
cd ..
wget http://launchpad.net/rubber/trunk/1.1/+download/rubber-1.1.tar.gz
tar zxvf rubber-1.1.tar.gz
cd rubber-1.1
./configure
make
make install
cd ..
wget http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-1.8.0.tar.gz
tar zxvf asterisk-1.8.0.tar.gz
cd asterisk-1.8.0
./configure
make menuselect
make
#this is ony for format MP3 - SVN required
contrib/scripts/get_mp3_source.sh
make install
make samples
make progdocs

複製代碼

角色

註冊會員

Rank: 2

2^#

發表於 2010-10-30 10:18 | 只看該作者

How was the result? Are you able to make it work?

YH

TOP

ckleea

新手上路

Rank: 1

3^#

發表於 2010-10-30 10:20 | 只看該作者

Apparently works. I just install in VM. Need to add more modules before real test. But looks better when is in CLI. c.f. rpm methods

TOP

ckleea

新手上路

Rank: 1

4^#

發表於 2010-10-30 10:47 | 只看該作者

本帖最後由 ckleea 於 2010-10-30 11:45 編輯

Still have errors in the GUI and DADHI
DADHI errors fixed. Forgot to make config after make install
Same for asterisk

TOP

ckleea

新手上路

Rank: 1

5^#

發表於 2010-10-30 12:45 | 只看該作者

Updated. It works in APL. No GUI at the moment. I duplicate my IP01 setting into asterisk 1.8.

TOP

bubblestar

新手上路

Rank: 1

6^#

發表於 2010-10-30 13:17 | 只看該作者

本帖最後由 bubblestar 於 2010-10-30 13:18 編輯

Speaking of installation on 64 bits system, it seems we may encounter problem for getting codec g723 and g729 as there are no ready-made codec for ATOM computer. I had tried to get them for my ATOM-Based Asterisk 1.4 or 1.6 but failed. I finally turned back to 32 bits for the time being.

Do you know whether these codecs are already included in Asterisk 1.8 or not ??

TOP

ckleea

新手上路

Rank: 1

7^#

發表於 2010-10-30 13:37 | 只看該作者

本帖最後由 ckleea 於 2010-10-30 19:24 編輯

Not yet, just start to make it works. I only install 32 bits.

See my first post, keep updating.

Now Gtalk work.

ast18*CLI> module load chan_gtalk.so
Loaded chan_gtalk.so
== Parsing '/etc/asterisk/gtalk.conf': == Found
== Registered RTP glue 'Gtalk'
== Registered channel type 'Gtalk' (Gtalk Channel Driver)
Loaded chan_gtalk.so => (Gtalk Channel Driver)
JABBER: asterisk INCOMING:
JABBER: asterisk INCOMING:

複製代碼

TOP

ckleea

新手上路

Rank: 1

8^#

發表於 2010-11-3 21:55 | 只看該作者

本帖最後由 ckleea 於 2010-11-3 22:00 編輯

Another update, as brave as bubblestar, I upgrade my asterisk 1.6.2.12 to a compiled version of asterisk 1.8. The GUI works as well.

Everything seems ok though some errors seen in the log. I put in g723 and g729 codec as well

screenshot.9.jpg (213.48 KB)

screenshot.9.jpg