返回列表 發帖
What are the codecs available for use to use?

YH

TOP

TOP

How is the Switchfin GUI as compared to Digium AsteriskGUI 2.0? As you know I have been come across several GUIs including Freepbx, Elastix. All of them do not satisify me because I need some functions which are very difficult to be found in Freepbx GUI.

YH

TOP

I have several question concerning the whole process as follows:

1) Where do you get the source codes?
2) Where do you get the cross-compiler?
3) How do compile the Switchfin codes?
4) How do you download the codes to the IP-01?

YH

TOP

As for me I like Asterisk 1.4 more than 1.6 because Asterisk 1.4 is more mature version.

YH

TOP

How much memory left after using the new firmware? When this firmware is compared to ATCOM company one, how much memory increased?

YH

TOP

I have no idea of how to compare with that of IP-01. Please use the GUI to read the following Usage for comparison.
  1. Disk Usage:

  2. Filesystem           1k-blocks      Used Available Use% Mounted on
  3. /dev/mtdblock0           14327     13001      1326  91% /
  4. /dev/mtdblock2          253952     71192    182760  28% /persistent
複製代碼
  1. Memory Usage:

  2.               total         used         free       shared      buffers
  3.   Mem:        45704        40880         4824            0          772
複製代碼
YH

TOP

From mine (ip-01), after issuing the command cat /proc/meminfo, it gives
  1. root:~> cat /proc/meminfo
  2. MemTotal:        45704 kB
  3. MemFree:          5108 kB
  4. Buffers:           772 kB
  5. Cached:          10996 kB
  6. SwapCached:          0 kB
  7. Active:           7060 kB
  8. Inactive:         4708 kB
  9. SwapTotal:           0 kB
  10. SwapFree:            0 kB
  11. Dirty:               0 kB
  12. Writeback:           0 kB
  13. AnonPages:           0 kB
  14. Mapped:              0 kB
  15. Slab:             4056 kB
  16. SReclaimable:      536 kB
  17. SUnreclaim:       3520 kB
  18. PageTables:          0 kB
  19. NFS_Unstable:        0 kB
  20. Bounce:              0 kB
  21. CommitLimit:     22852 kB
  22. Committed_AS:        0 kB
  23. VmallocTotal:        0 kB
  24. VmallocUsed:         0 kB
  25. VmallocChunk:        0 kB
複製代碼
Since I have many trunks and users, I do not know whether it will consume more memory size that yours.

YH

TOP

For the codec G729, from the developer's point of view, he gives you a general suggestion for the use of the codec G729, which is required a license from the corresponding body. However in ATCOM, it seems that they do not mention this point as I guess they obtained the G729 codec license from the blackfin processer company.

Concernng the codec Speex, I believe that you may compile it from the speex source codecs. However it may involve a lot of efforct in finding the associated libaries in the course of code complilation. I believe that you can overcome this problem.

Also you know that there are so many software bugs in the current firmware, I hope that the kernel in Switchfin will fix all these bugs.


YH

TOP

In the ATCOM IP-01, when we enter the command ps, it gives
  1.     1 root        568 S   /sbin/init
  2.     2 root            SW< [kthreadd]
  3.     3 root            SWN [ksoftirqd/0]
  4.     4 root            SW< [events/0]
  5.     5 root            SW< [khelper]
  6.     6 root            SW< [kblockd/0]
  7.     7 root            SW  [pdflush]
  8.     8 root            SW  [pdflush]
  9.     9 root            SW< [kswapd0]
  10.    10 root            SW< [aio/0]
  11.    11 root            SW< [mtdblockd]
  12.    79 root            SW< [spi_mmc]
  13.   112 root       1060 S   /bin/sh /bin/keepalive 192.168.2.1 60
  14.   128 root        820 S   ntpd -4 -c /etc/ntp.conf -g -n
  15.   133 root        484 S   /bin/cron
  16.   151 root      12580 S   asterisk -f
  17.   153 root       1060 S   /bin/sh /persistent/etc/IsAsteriskAlive.sh
  18.   155 root       1060 S   /bin/sh /persistent/etc/RebootTime.sh
  19.   167 root      12580 S   asterisk -f
  20.   173 root      12580 S   asterisk -f
  21.   174 root      12580 S   asterisk -f
  22.   175 root      12580 S   asterisk -f
  23.   180 root      12580 S   asterisk -f
  24.   194 root      12580 S   asterisk -f
  25.   214 root      12580 S   asterisk -f
  26.   219 root      12580 S   asterisk -f
  27.   259 root      12580 S   asterisk -f
  28.   260 root      12580 S   asterisk -f
  29.   261 root      12580 S   asterisk -f
  30.   262 root      12580 S   asterisk -f
  31.   263 root      12580 S   asterisk -f
  32.   264 root      12580 S   asterisk -f
  33.   265 root      12580 S   asterisk -f
  34.   266 root      12580 S   asterisk -f
  35.   267 root      12580 S   asterisk -f
  36.   268 root      12580 S   asterisk -f
  37.   269 root      12580 S   asterisk -f
  38.   270 root      12580 S   asterisk -f
  39.   293 root      12580 S   asterisk -f
  40.   310 root       1060 S   /bin/sh /etc/checkip.sh
  41.   311 root        484 S   inetd
  42.   324 root       1068 S   -/bin/sh
  43.   325 root        476 S   /bin/watchdogd -f -s
  44.   326 root        968 S   /sbin/syslogd -n
  45.   327 root        976 S   /sbin/klogd -n
  46.   328 root      12580 S   asterisk -f
  47. 24577 root      12580 S   asterisk -f
  48. 30355 root        968 S   sleep 180
  49. 30358 root        968 S   sleep 60
  50. 30359 root        884 S   /bin/dropbear -i 2 > /dev/null
  51. 30364 root        968 S   sleep 60
  52. 30370 root        968 S   sleep 50
  53. 30371 root       1068 S   -sh
  54. 30372 root        972 R   ps
複製代碼
I would like to know how many asterisk processes in Switchfin?

Thank you.

YH

TOP

Thank ckleea. It is seen from the log that Swtichfin and Astfin look more or less the same. There are many asterisk processing running at the same time. It is different from that of CentOS, only one asterisk process is executing.

YH

TOP

Any news on SwitchFin?

YH

TOP

I have two questions about the Switchfin as follows:

1) How about the performance of G729 codec?

2) How about the FXO module in IP-01, does it function after using Switchfin firmware?

YH

TOP

You means the WAN port of IP-01 has a PPPoE Dialler to the ADSL modem?

YH

TOP

Have you test the function of cron if it works or not? Also the stability of the new firmware?

YH

TOP

返回列表