返回列表 發帖

Asterisk-GUI 2.0 + TDM400P - hangup detection problems with FXO ports

Does anyone have the experience of setting up Asterisk-GUI 2.0 using Dadhi driver without the issue of hangup detection problems with FXO ports?

It seems most of settings in Asterisk-GUI 2.0 for TDM400P cards do not apply. I believe that it may due to Zaptel driver is used instead of Dahdi driver in Asterisk-GUI.

If you know the way of fixing this problems, please please let us know. Otherwise whenever callers from FXO ports hangup before the callee picks up the calls. The callee's phone will ring for around 1 minute and stop.

YH

The SVN version Asterisk-GUI looks like:

0025.png
2010-8-30 23:26



YH

TOP

It seems that there is a software bug in SVN 5072 for "using this filter" and still waiting for a bug-fixed version. For the timing, I shall use the ordinary plain Asterisk only.

If someone wants to use Asterisk-GUI, I still recommend Asterisk 1.7: Option 4.

YH

TOP

本帖最後由 角色 於 2010-8-30 23:06 編輯

OS Version:
Linux leo 2.6.18-194.11.1.el5 #1 SMP Tue Aug 10 19:09:06 EDT 2010 i686 i686 i386 GNU/Linux

Uptime:
23:02:55 up 1:17, 1 user,
Load Average: 0.00, 0.00, 0.00

Asterisk Build:
Asterisk/1.4.35
Asterisk GUI-version : SVN-branch-2.0-r5072

Server Date & TimeZone:Mon Aug 30 23:02:55 HKT 2010

Hostname:
leo



My setting of those two files are:

dahdi_guiread.conf

[general]
  fxsks=1,2
  echocanceller=mg2,1-240
  loadzone=cn
  defaultzone=cn


dahdi_scan.conf

  active=yes
  alarms=OK
  description=Wildcard TDM400P REV I Board 5
  name=WCTDM/4
  manufacturer=Digium
  devicetype=Wildcard TDM400P REV I
  location=PCI Bus 05 Slot 01
  basechan=1
  totchans=4
  irq=82
  type=analog
  port=1,FXO
  port=2,FXO
  port=3,none
  port=4,none


YH

TOP

The file is more or less the same. They are automatically generated by the system. However the outgoing dialling method has been changed. For instance, _9. as the calling pattern, if I dial 92001, after stripping the digit 9, 2001 will be sent. However, from CLI, it show nothing to be sent.

YH

TOP

How about to put my files into your conf?

TOP

With the compiled version, the settings in the GUI looks better. The adjusted values are still there after reboot.

With the compilfed version, the hangup problem still perisists.

YH

TOP

In order to fix the hangup problem, I believe that I have to recompile the Asterisk-GUI using the Dahdi driver.

YH

TOP

返回列表