返回列表 發帖

運行Asterisk Server 本身可能只需少於2.5W 電量

最近在ckleea兄協助下購入一部 mini-itx 底板作藍本的小型電腦作Asterisk Server,現在終於攪好了,今晚可以正式開工大吉,是運行Asterisk 1.8 的。

購入原因是希望可以低碳運行,雖然淨底板 + PICO PSU + PCIe Wireless/Bluetooth 都要用去23.81W,無咩特別超級省電,但估唔到,加了一隻SSD 硬碟及一塊TDM400P + 2 FXO / 2 FSX 子卡,用電量竟然出奇地能夠維持在25.77W - 26.3W左右,即是說,後者的加入只是多耗用大約 1.96W - 2.49W 左右的電量。確是很意外。



淨機 + RAM

1.png
2010-12-22 22:32


SSD

2.png
2010-12-22 22:32


地方有限要把SSD另外綁實

3.png
2010-12-22 22:32


放好TDM400P後

4.png
2010-12-22 22:32


放置SSD之後,應另可多放一枚

5.png
2010-12-22 22:32


所有組件完成圖

6.png
2010-12-22 22:32


淨底板+RAM耗電量

7.png
2010-12-22 22:32

Congs!

Wait for the performance report!

TOP

Has no time to deal with the new PC. What size of SSD you bought?

Do you just do asterisk 1.8.1.1? by rpm or compile from source?

Do you get GUI works? at least from firefox.

TOP

我用的是技嘉d525底板   2G DDR3内存  20G笔记本硬盘 一块AX400P  两块FXO 两块FXS  功耗是27-28W之间   你块板比我的要低4W左右  不过角色的仲低  居然只得17W   

可能我个只底板上的细风扇的功耗也有1W吧

你这块应该不是固态电容吧?

TOP

回復 2# Qnewbie


    I think it takes some time to evaluate and observe its actual performance.  The first impression is that the system is running in a very quiet state and respond quickly.

TOP

回復 3# ckleea


The SSD is 60GB.  I compiled from source using the latest Asterisk 1.8.1.1 version directly.   

Not using GUI yet.  The bad failing experience is still hanging aroung my head.  What do you think of the probaility of success at this stage?  Anyway, will try it later after setting up new features such as Google Voice, etc first.

TOP

回復 4# lttliang


技嘉D525TUD 雙核的我也有用。角色兄是使用 Intel D510MO 單核的,如果只計算單項底板省電方面,他的一定勝一籌。但不要忘記,要低碳同時,也不能太過犧牲效率的。而且還要看整體配置及實際應用用途等,只要內裡組件配合得宜,一樣做到低碳目標的。

印象中,角色兄只用 1GB RAM,一個40GB左右硬碟 + TDM400P 連 2FXO 子卡 (沒有用FXS),食量相當細小,可能還沒有風扇(可以少 1 W)。但據悉,他也有打算要購入另一部D525作戰用呢!

而我的技嘉D525TUD 用上4GB RAM + 老舊的320GB HDD 大硬碟 + 2FXO 及 2FXS,所以食電量當然會大了一點,而且是用傳統的ATX 400W大火牛 (風扇三大把,呢度都用唔少電啦)。因此.....

現在新的 Intel D525MW 也是用上 4GB RAM,不過改用了SSD硬碟和PICO PSU 供電,其他則用回舊的TMD400卡。但只需用少於2.5W電量。這個投資,長期計相當化算。

Intel D525MW 是否用固態電溶,我也不太清楚。

TOP

回復  lttliang


技嘉D525TUD 雙核的我也有用。角色兄是使用 Intel D510MO 單核的,如果只計算單項底板省 ...
bubblestar 發表於 2010-12-23 11:34



    你用4G RAM的话  当然最好装64bit的asterisk了
   但是我与你们不同,我的使用要求相对来讲不是太高,你们用code写,经常会加D新功能上去,而且基本上就是用ET263+2B+DISA+CallBlack,所以一般系统可
   以运作了,就唔会去睇了,除非日后有谂到需要的新功能先用

TOP

看来bubblestar兄的设备越来越多,那么有更加多的实验结果会出来,那么我们就有福了。

角色

TOP

最近在ckleea兄協助下購入一部 mini-itx 底板作藍本的小型電腦作Asterisk Server,現在終於攪好了,今晚可 ...
bubblestar 發表於 2010-12-22 22:42



How is your SSD performance? I just have time to have a look at Wan Chai Computer system. Vertex 2 said to have 285 MB read and 275 MB write. It is very fast.

I am a bit jealous.

TOP

回復 10# ckleea


   
Quite satifactory at this point of time.  When booting into the system, I always find that my system is up faster than my Monitor respond to detect itself.

Don't jealous, act now.

Merry Christmas !!

TOP

回復 11# bubblestar

There is another brand called Phenoix Pro. a price difference of Hk$100 less. Claimed from the same source.

TOP

Oh! come on.  Another new temptation! Ha Ha.  I need Angels tonight.

Thanks for the info. anyway.  Will search the details later.

TOP

This is the problem why I can't trust. SSD market is growing rapidly. But as far as I know, not for a-data

TOP

有没有人用路由 刷openwrt 做Asterisk Server  加FXO网关 功耗在10左右

TOP

返回列表