能否在Asterisk Server使用USB 3G手指的打電話功能?

Rank: 1

36^#

發表於 2011-3-6 19:55 | 只看該作者

回復 35# ckleea

show unlocked的話你可以找家人借張其他台的SIM卡試試!

Welcome to my TaoBao shop: http://mandymak520.taobao.com/

Rank: 1

35^#

發表於 2011-3-6 19:28 | 只看該作者

Has been shown unlocked.

雯雯

Rank: 1

34^#

發表於 2011-3-6 19:22 | 只看該作者

回復 33# 角色

對呀! 我在第1樓的帖裏的連結就有教unlock方法.

Welcome to my TaoBao shop: http://mandymak520.taobao.com/

角色

註冊會員

Rank: 2

33^#

發表於 2011-3-6 18:49 | 只看該作者

自己unlocked不是可以吗？

角色

Rank: 1

32^#

發表於 2011-3-6 14:59 | 只看該作者

有冇unlocked 手指試？

Rank: 1

31^#

發表於 2011-3-6 14:57 | 只看該作者

暫時都未能做到incoming and outgoing call.

雯雯

Rank: 1

30^#

發表於 2011-2-7 19:09 | 只看該作者

回復 29# ckleea

可能你要再弄一下setting, 或者嘗試用其他的華為USB 3G手指去試.

Welcome to my TaoBao shop: http://mandymak520.taobao.com/

Rank: 1

29^#

發表於 2011-2-7 18:56 | 只看該作者

試過唔同SIMS，都係做唔到outgoing call.

-- Accepting AUTHENTICATED call from 192.168.1xx.xxx:
   > requested format = alaw,
   > requested prefs = disabled,
   > actual format = alaw,
   > host prefs = disabled,
   > priority = reqonly
-- Executing [xxxxxxxxxxx@DLPN_DP1:1] Dial("IAX2/6xxx-1202", "Datacard/g0/8529xxxxxxx") in new stack
[Feb  7 19:16:18] WARNING[10626]: channel.c:165 channel_request: [g0] Request to call on device which can not make call at this moment
[Feb  7 19:16:18] WARNING[10626]: app_dial.c:2039 dial_exec_full: Unable to create channel of type 'Datacard' (cause 44 - Requested channel not available)
  == Everyone is busy/congested at this time (1:0/0/1)

Rank: 1

28^#

發表於 2011-2-7 17:58 | 只看該作者

Updated. my E169G is already unlocked for SIM and Voice.

selection :
manufacturer - Huawei modems
model - Auto detect (recommended)

Found modem       : E169G
Model             : Huawei E169/E169G
IMEI             :
Serial NR.       :
Firmware          : 11.314.09.50.00
Compile date / time : Apr 26 2008 12:04:28
Dashboard version : UTPS11.002.03.05.23_MAC11.201.04.02.156
Chipset          : Qualcomm MSM6280
NAND Flash       : samsung_k9f1208
Voice feature    : enabled
SIM Lock status    : unlocked
Wrong codes entered : 0 (unlock attempts left : 10)

Rank: 1

27^#

發表於 2011-2-7 17:44 | 只看該作者

Successful SMS can be sent from CLI. But not outgoing call, probably not voice enable.

Rank: 1

26^#

發表於 2011-2-7 17:11 | 只看該作者

Some more postings

------------- Settings ------------
  Device                : datacard0
  Audio                : /dev/ttyUSB1
  Data                   : /dev/ttyUSB2
  IMEI                   :
  IMSI                   :
  Channel Language       : en
  Context                : default
  Exten                : +1234567890
  Group                : 0
  RX gain                : 0
  TX gain                : 0
  U2Diag                : -1
  Use CallingPres       : Yes
  Default CallingPres    : Presentation Allowed, Passed Screen
  Auto delete SMS       : Yes
  Disable SMS          : No
  Reset Datacard       : Yes
  SMS PDU                : Yes
  Call Waiting          : auto
  DTMF                   : relax
  Minimal DTMF Gap       : 45
  Minimal DTMF Duration : 80
  Minimal DTMF Interval : 200