The Call forward destination number fields only allow 1 number at present.
The Inbound Call route parameters, on the other hand, would allow you to fork the call the multiple numbers, simultaneously. The limit 4.
Some examples with SP1 InboundCallRoute:
{ph,SP1(12345678),SP2(11112234),SP2(44445555)}, OR
{(33931111|3399xxxx):ph,PP(ob200123456),SP2(11112234),SP2(44445555)}
This is assuming you can support at least 2 calls per SP service. Whichever number answers first will "win" and the other calls will be canceled by the OBi automatically.
---------
Note: If you include LI(some-number) in the route, however, LI will "win" most of the time since there is no easy way to tell if the call on the analog PSTN line is answered; so the device simply assumes the call is connected once it finishes dialing out the number on the PSTN line (hence it wins).
In 1.2 (currently in beta) we offer a new feature to detect if outbound call on PSTN line is connected based on tones and signal detected on the LINE. But this may require some tweaking for your local phone company. By default that feature is not enabled. |